High speed arch skeleton die Skeleton slope protection formwork The arch skeleton slope protection brick mold is cast-in-situ production, which is mostly used on the slopes on both sides of the road to reduce landslides. The mold is divided into upper, middle and lower parts. The middle part is a complete set of arch skeleton mold. A complete set of skeleton is divided into eight pieces. The upper and lower half arc parts are composed of two pieces respectively, and the straight bar parts on both sides are also composed of two pieces. Generally, the inner diameter of the mold is about 2-3m, compared with the previous concrete hexagonal blocks, The cost of secondary transportation is reduced because the die is divided into several small pieces.
Construction of high-speed railway arch framework mould:
It is very convenient to move the high-speed rail arch framework mold to the construction site. After the mold is placed on the slope, it can be grouted. In order to increase the support force of the mold, the outside of the mold can also be reinforced and supported with an iron rod, which greatly saves the production and installation time, and the mold can be reused, saving the production cost of the manufacturer.